GE Appliances family install pricing
GE Appliances (owned by Haier since 2016, still headquartered in Louisville, KY) sells three branded dishwasher lines that share a common platform: base GE, GE Profile (mid-premium), and Cafe (designer premium). All three install identically. Pricing surveyed across the GE Appliances dishwasher catalogue and authorised dealer install bundles in April 2026:
| Tier | Appliance MSRP | Install labor | Total install package |
|---|---|---|---|
| GE Base (GDF, GDT) | $499-749 | $150-250 | $650-1,000 |
| GE Profile (PDT, PDP) | $849-1,249 | $150-275 | $1,000-1,525 |
| Cafe (CDT) | $1,299-1,899 | $175-325 | $1,475-2,225 |
| Cafe panel-ready | $1,899-2,399 | $225-450 | $2,125-2,850+ |
Why GE's install kit makes things easier
GE ships every dishwasher with the GE installation kit (part GPF1FP) inside the carton. The kit includes a 4-foot 3-prong power cord, a hardwire conduit elbow, a 6-foot 3/8 inch braided supply line, a 10-foot drain hose extension, and the four mounting brackets (top and side variants). Bosch and Miele require the installer to supply separate parts or order an optional kit.
The practical effect: a GE installer arrives with the kit already in the box, does not need a hardware-store run mid-install, and can pivot between cord-and-plug or hardwire termination based on what your kitchen actually has. This is one reason GE's install labor sits at the lower end of premium-brand pricing despite the brand name recognition. The installer's time is the cost driver, and GE's kit shaves 15 to 30 minutes off a typical job.
Cafe's extra install consideration
The Cafe line layers premium finish on the same hardware. Matte white, matte black, and brushed stainless options are standard; brushed brass and brushed copper hardware kits are optional ($79 to $149 from the GE accessories catalogue, $0 to $50 in install labor to swap from the as-shipped chrome to the upgrade hardware).
The Cafe handle is heavier than standard (it is solid metal rather than the hollow stainless of GE Profile) and the top-mount hinge takes slightly more torque to align. Most installers absorb the extra 15 minutes without surcharging. Where this becomes a cost item: if you order a Cafe with the optional designer-handle hardware separately, the installer has to swap during the install, which adds 30 to 45 minutes and the install bundle pricing may bump up by $40 to $75.
GE first-time install cost
A first-time GE install in a kitchen with no prior dishwasher (a rebay during a kitchen remodel, or a never-had-one apartment retrofit) runs $300 to $700 in labor depending on the plumbing and electrical work. The dishwasher labor portion is unchanged; what drives the cost is the licensed plumber for the new supply and drain runs ($150 to $400) and the licensed electrician for the new 20-amp circuit ($250 to $900 if a new circuit is required, $0 if an existing 20-amp outlet is within 36 inches of the dishwasher cavity per NEC 422.16).
For the full first-time install picture see first-time dishwasher install cost.
What is included in a GE installer's standard scope
- Disconnect and remove the existing dishwasher.
- Slide the new GE into the bay (single-person lift, 62 to 78 pounds depending on tier).
- Connect the supplied 3/8 inch braided supply line to the hot water shutoff under the sink and to the dishwasher inlet solenoid. Hand-tight plus a quarter turn.
- Route the drain hose with a high loop (or air gap on California installations) and secure to the underside of the countertop.
- Plug into existing outlet, or wire into existing hardwire junction box using the supplied conduit elbow.
- Adjust the two front feet and the rear roller for level.
- Top-mount or side-mount the unit to the cabinet using the supplied brackets.
- Run a 20-minute test cycle to confirm fill, drain, heater, and Sani Rinse high-temp.
- Walk the homeowner through the SmartHQ app pairing (Profile and Cafe tiers).
GE retailer install bundles
GE is sold by every major appliance retailer in the US. Retailer install bundle pricing for GE is consistent with other major brands:
- Home Depot: $99 basic install bundle. See Home Depot dishwasher installation cost.
- Lowe's: $159 install bundle, often includes haul-away. See Lowe's dishwasher installation cost.
- Best Buy: $169 to $249 Geek Squad install. See Best Buy dishwasher installation cost.
- Costco: bundled into appliance price at the warehouse, executed by Costco's third-party installer (CXT Software-dispatched).
Independent appliance technician booked via Angi or Thumbtack: $150 to $300, often the same network the retailers use, sometimes 10 to 20% cheaper because there is no retailer markup.
DIY GE install
A GE replacement is among the friendliest brands to DIY because of the in-box install kit. Budget 2 to 3 hours. The GE installation manual (search the model number plus "installation instructions" on the GE Appliances support site) walks you through the process clearly. The two beginner mistakes specific to GE: forgetting to remove the styrofoam shipping insert from inside the tub (it muffles the sprayer and floods the cabinet when ignored), and skipping the supplied drain-hose clamp at the disposal connection (the press-fit alone leaks under sustained pressure).
For the full DIY procedure see DIY dishwasher installation guide.
GE warranty and what installation affects
GE Appliances dishwashers ship with a one-year limited warranty on parts and labor as standard, with extended coverage on the stainless tub (lifetime against rust-through to the original purchaser on Profile and Cafe). The warranty disclaims damage caused by improper installation; like Bosch and Miele, GE does not require an authorised installer but does require that the installation follow the published instructions.
Save the install paperwork. If you DIY, photograph each connection point before final cabinet push-back; if the unit develops a leak in year 2 and you make a claim, GE's technician will inspect the connections.
FAQ
Is GE cheaper to install than Bosch?
Marginally. GE's in-box install kit saves 15 to 30 minutes of installer time, which on hourly billing nets to $20 to $50 saved. On stone counters where Bosch requires the side-mount kit, GE installs without the premium, which saves another $50 to $100. For a wood or laminate counter the difference is small.
What is the SmartHQ pairing for?
GE's SmartHQ app lets you start a cycle remotely, check status, receive cycle-complete notifications, and reorder detergent. Not essential, but the pairing takes 10 minutes and is worth doing during install while the installer is still present. Works with Profile and Cafe; basic GE units are not Wi-Fi capable.
Does Cafe install differently from Profile?
Identical plumbing, electrical, and mounting. Cafe's only install difference is 15 to 30 extra minutes for handle alignment and final trim cleanup on the matte finishes (smudges show more than on standard stainless).
How long does GE installation take?
Replacement on existing hookups: 60 to 90 minutes. Stone-counter side-mount: 75 to 105 minutes. Cafe with custom handle hardware: 90 to 120 minutes. Panel-ready Cafe install with cabinet panel: 120 to 180 minutes plus panel fitting. First-time no-hookup install: 4 to 6 hours.
Does GE make hardwire-only models like Miele?
No. All GE residential dishwashers ship with the cord-and-plug as the default; hardwire is supported via the supplied installation kit but not required. This makes GE the more flexible install in retrofit kitchens.